Electrochemical polymerization of 2,5-dimethoxyaniline on type 304 stainless steel

  • Reynaldo Ortiz Universidad de Los Andes-Venezuela
  • Yovelis Hernández Universidad de Los Andes-Venezuela
  • Elkis Weinhold Universidad de Los Andes-Venezuela
  • Olga Márquez Universidad de Los Andes-Venezuela
  • Jairo Márquez Universidad de Los Andes-Venezuela

Abstract

Poly(2.5-dimethoxianiline)(PDMA) was electrodeposited on 304 steel electrodes under potential cycling conditions, using 0.1 M 2.5-dimethoxyaniline solutions in 1M phosphoric acid. Under these conditions, thin polymer films were obtained on the electrode surface. FTIR spectroscopy study shows that the structure of the obtained polymer is the same than that reported on Pt and glassy carbon. Film showed up electrochemical activity between -0.2 and 0.7 V vs Ag/AgC1 and a marked electrochromic effect. Linear polarization and open circuit experiments showed that poly(2.5-dimethoxyaniline) serves as a corrosion inhibitor of the 304 steel in HCI / NaC1 media.

Downloads

Download data is not yet available.
How to Cite
Ortiz, R., Hernández, Y., Weinhold, E., Márquez, O. and Márquez, J. (1) “Electrochemical polymerization of 2,5-dimethoxyaniline on type 304 stainless steel”, Revista Técnica de la Facultad de Ingeniería. Universidad del Zulia, 24(3). Available at: https://mail.produccioncientificaluz.org/index.php/tecnica/article/view/5756 (Accessed: 25November2024).
Issue
Vol. 24 No. 3
Section
Review paper

 

Copyright

La Revista Técnica de la Facultad de Ingeniería declara que los derechos de autor de los trabajos originales publicados, corresponden y son propiedad intelectual de sus autores. Los autores preservan sus derechos de autoría y publicación sin restricciones, según la licencia pública internacional no comercial ShareAlike 4.0

Most read articles by the same author(s)