Continuous improvement of a face protection mask using quality function deployment

• Salvador Montesinos González https://orcid.org/0000-0001-6006-7790
• Carlos Vázquez Cid de León https://orcid.org/0000-0003-2067-0565
• Eric Amín Ramírez Castillo https://orcid.org/0000-0002-8762-1509

DOI: https://doi.org/10.52080/rvgluz.28.e10.25

Palabras clave: Kano model, house of quality (hoq), quality function deployment (qfd), continuous improvement

Resumen

This article aims to examine the applicability of the Quality Function Deployment (QFD) and the Kano model considering the expectations of the client, to a personal facial protection equipment against the Coronavirus 2019 (COVID-19), a disease that has caused a global pandemic, posing threats to public safety and social economies. In the first phase of the study, user requirements are identified at the local level based on current designs through the Kano model. This data is then merged with a Voice of Engineer (VoE) chart listing technical attributes and characteristics corresponding to items in Voice of Customer (VoC). The quality characteristics are then obtained by calculating the weights according to the level of importance, which are then transformed into measurable technical attributes in the House of Quality (HOQ). Through the weighting process using the pareto diagram, the main technical characteristics are identified, in which attention must be paid and the resources to be considered to satisfy said requirements must be evaluated. Finally, as a result, a 3D design is defined to make the prototype considering the needs of the client, which allows deducing the good applicability of the Kano-QFD model to carry out the development process of any product.

Citas

Aguwa, C. C., Monplaisir, L., & Turgut, O. (2012). Voice of the customer: Customer satisfaction ratio based analysis. Expert Systems with Applications, 39(11), 10112–10119. https://doi.org/10.1016/j.eswa.2012.02.071

Akao, Y. & Mazur, G. (2003). The leading edge in QFD: past, present and future. International Journal of Quality & Reliability Management, 20(1), 20-35. https://doi.org/10.1108/02656710310453791

Alarcón, J., Ormeño, G., Durán, E., Bustos, C. & Montoya, P. (2021). Diseño y fabricación de una barrera facial para personal de salud en el contexto de emergencia sanitaria covid-19. Interciencia, 46(5), 224-231. https://doi.org/0378-1844/14/07/468-08

Angamarca, G., Díaz, Y., & Martínez, C. (2020). Calidad percibida por los clientes de los hoteles de la provincia Los Ríos, Ecuador. Revista de Ciencias Sociales (RCS), 26(4), 380-393. https://produccioncientificaluz.org/index.php/rcs/index

Carnevalli, J. & Miguel, P. (2008). Review, analysis and classification of the literature on QFD-types of research, difficulties and benefits. International journal production economics, 114(2), 737-754. https://doi.org/10.1016/j.ijpe.2008.03.006

Chan, L-K & Wu, M-L. (2005). A systematic approach to quality function deployment with a full illustrative example. Omega-International journal of management science, 33(2), 119-139. https://doi.org/10.1016/j.omega.2004.03.010

Chan, L-K, & Wu, M-L. (2007). Quality Function Deployment: A Comprehensive Review of Its Concepts and Methods, 15(1), 23-35. https://doi.org/10.1081/QEN-120006708

Chu, D. K., Akl, E. A., Duda, S., Solo, K., Yaacoub, S., Schünemann, H. J., … Schünemann, H. J. (2020). Physical distancing, face masks, and eye protection to prevent person-to-person transmission of SARS-CoV-2 and COVID-19: a systematic review and meta-analysis. The Lancet. https://doi.org/10.1016/s0140-6736(20)31142-9

Cohen, L. (1995). Quality function deployment: How to make QFD work for you. Addison-Wesley.

Cook, T. (2020) Personal protective equipment during the COVID-19 pandemic –a narrative review. Anaesthesia, 75, 920-927. https://doi.org/10.1111/anae.15071

Cui, J., Li, F. & Shi, Z. L. (2019). Origin and evolution of pathogenic coronaviruses. Nature Rev., 17(1), 81–92. http://dx.doi.org/10.1038/s41579-018-0118-9.

Erkarslan, O. & Yilmaz, H. (2011). Optimization of the product design through quality function deployment and analytical hierarchy process: a case study of a ceramic washbasin. Metu journal of the faculty of architecture, 28(1), 1-22. https://doi.org/10.4305/METU.JFA.2011.1

Found, P., and Harrison, R. (٢٠١٢). Understanding the lean voice of the customer. International Journal of Lean Six Sigma, 3(3), 251-267. https://doi.org/10.1108/20401461211282736

Govers, C. (2001). QFD not just a tool but a way of quality management. International journal production economics, 69(2), 151-159. https://doi.org/10.1016/S0925-5273(00)00057-8

Gralinski, L. E. & Menachery, V. D. (2020). Return of the coronavirus: 2019-nCoV. Viruses, 12(2). http://dx.doi.org/10.3390/v12020135

Han, S., Chen, S. Ebrahimpour, M. & Sodhi, M. (2001). A conceptual QFD planning model. International Journal of Quality & Reliability Management, 18(8), 796-812. https://doi.org/10.1108/02656710110401187

Hauser, J. R., Griffin, A., Klein, R. L., Katz, G. M., & Gaskin, S. P. (2010). Quality Function Deployment (QFD). Wiley International Encyclopedia of Marketing. doi:١٠.١٠٠٢/٩٧٨١٤٤٤٣١٦٥٦٨.wiem٠٥٠

Hernández, R., Fernández, C., & Baptista, P. (2020). Metodología de la investigación. (7ma. ed.). McGraw-Hill

Herzwurm, G. & Schockert, S. (2003). The leading edge in QFD for software and electronic business. International Journal of Quality and Reliability Management, 20(1), 36-55. https://doi.org/10.1108/02656710310453809

Hogstrom, C., Rosner, M., & Gustafsson, A. (2010). How to create attractive and unique customer experiences: An application of Kano’s theory of attractive quality to recreational tourism. Marketing Intelligence & Planning, 28(4), 385–402. https://doi.org/10.1108/02634501011053531

Howard, J., Huang, A., Li, Z., Tufekci, Z., Zdimal, V., van der Westhuizen, H.M., von Delft, A., Price, A., Fridman, L., Tang, L. H., Tang, V., Watson, G. L., Bax, C. E., Shaikh, R., Questier, F., Hernandez, D., Chu, L. F., Ramirez, C. M., y Rimoin, A. W. (2020). An evidence review of face masks against COVID-19. Proc Natl Acad Sci USA, 26, 118(4), e2014564118. https://doi.org/10.1073/pnas.2014564118

Hunt, R.A. & Xavier, F.B. (2003). The leading edge in strategic QFD. International Journal of Quality and Reliability Management, 20(1), 56-73. https://doi.org/10.1108/02656710310453818

Ino, Y., Yano, T. & Yamamoto, H. (2020). A new simple method of handmade face shield using A4-size OHP sheet, during the COVID-19 pandemic. Digestive Endoscopy, 32(5). https://doi.10.1111/den.13724

Jing, H, Zhang, L. & Wen, B. (2010). Requirement Optimization for House of Quality Based on Product Quality Improvement. China Mechanical Engineering, 21(1), 94-99.

Lin, F-H., Tsai, S-B., Lee, Y-C., Hsiao, C-F, Zhou J, Wang J, et al, (2017) Empirical research on Kano’s model and customer satisfaction. PLoS ONE, 12(9), e0183888. https://doi.org/10.1371/journal.pone.0183888

Liu, S. L. & Saif, L. (2020). Emerging viruses without borders: the Wuhan coronavirus. Viruses, 12(2). http://dx.doi.org/10.3390/v12020130

Luor, T., Lu, H. P., Chien, K. M., & Wu, T. C. (2015). Contribution to quality research: A literature review of Kano’s model from 1998 to 2012. Total Quality Management & Business Excellence, 26(3–4), 234–247. https://doi.org/10.1080/14783363.2012.733264

Marasinghe, K. M. (2019). A systematic review investigating the effectiveness of face mask use in limiting the spread of COVID-19 among medically not diagnosed individuals: shedding light on current recommendations provided to individuals not medically diagnosed with COVID-19, 1–19. http://doi.org/10.21203/rs.3.rs-16701/v2

Maritan, D. (2015). Practical Manual of Quality Function Deployment. (1ra ed.). Springer. https://doi.org/10.1007/978-3-319-08521-0

Martins, A. & Aspinwall, E. (2001). Quality function deployment: an empirical study in the UK. Total quality management, 12(5), 575-588. https://doi.org/10.1080/09544120120060060

Méndez, C. (2007). Metodología: diseño y desarrollo del proceso de investigación con énfasis en ciencias empresariales. (4ta ed.). Limusa.

Mendoza, U. & Solís, F. T. (2022). Calidad, conocimiento e innovación de procesos de manufactura en Ciudad Juárez, México. Retos, 12(23), 83-109. https://doi.org/10.17163/ret.n23.2022.05

Mikulić, J. & Prebežac, D. (2011). A critical review of techniques for classifying quality attributes in the Kano model. Managing Service Quality: An International Journal, 21(1), 46-66. https://doi.org/10.1108/09604521111100243

Milton, A. & Rodgers, P. (2013). Research Methods for Product Design. Laurence King Publishing.

Moges, A. (2009). Design for Manufacturability and Concurrent Engineering for Product Development. World Academy of Science, Engineering and Technology, 49, 240-246.

Montesinos, S., Vázquez, C. & Maya, I. (2020). Mejora Continua en una empresa en México: estudio desde el ciclo Deming. Revista Venezolana de Gerencia, 92, 1863-1883. https://doi.org/10.37960/rvg.v25i92.34301

Morales, M. (2021). Translation: Covid-19, new technologies, productivity and business’ emergency plan. Telos Revista de Estudios Interdisciplinarios en Ciencias Sociales, 23(3), 764-773. https://doi.org/10.36390/telos233.16

Nievas, B. & Garcia, S. (2020). Salud, una respuesta social frente a la pandemia por Covid-19. Revista de Ciencias Sociales, 26(4), 23-27. https://doi.org/10.31876/rcs.v26i4.34643

Organización Mundial de la Salud- OMS (2020a). Preguntas y respuestas sobre la enfermedad por coronavirus (COVID-19). https://elpais.com/sociedad/2020-03-11/la-oms-declara-el-brote-de-coronavirus-pandemia-global.html

Ortega, M. (2020). Efectos del Covid-19 en el comportamiento del consumidor: Caso Ecuador. Retos, 10(20), 233-247. https://doi.org/10.17163/ret.n20.2020.03

Orús, A. (2021). Statista. https://es.statista.com/estadisticas/1104227/numero-acumulado-de-casos-de-coronavirus-covid-19-en-el-mundo-enero-marzo/

QFD Institute (2013). The official source for QFD. http://www.qfdi.org/

Qingliang Meng, Q. & Dong, J. (2018). Future Direction and Visual Analysis of Kano Model: A Literature Review. Journal of Service Science and Management, 11(04), 399-413. https://doi.org/10.4236/jssm.2018.114028

Quintero, M. (2020). Careta de protección facial para personal médico (col-univalle face shield) de facil fabricación ante desabastecimiento extremo o imposibilidad de acceso en la pandemia por sars cov-2, https://doi.org/10.13140/RG.2.2.28413.92647/1

Raharjo, H., Xie, M. & Brombacher, A. (2007). Prioritizing quality characteristics in dynamic quality function deployment. International Journal of Production Research, 44(23), 5005-5018. https://doi.org/10.1080/00207540600547414

Rahman, M. & Williams, S. J. (2020). Membrane tension may define the deadliest virus infection. Colloid and Interface Science Communications, 40(1), 1-6 https://doi.org/10.1016/j.colcom.2020.100338

Roberge, R. J. (2016). Face shields for infection control: A review. Journal of Occupational and Environmental Hygiene, 13(4), 235-245. https://doi.10.1080/15459624.2015.1095302

Rocha, J. J., Julio, J. J., y Semprun, R. Á. (2021). Economía social como alternativa ante una sociedad post coronavirus. Revista de Ciencias Sociales, 27(2), 147-162. https://doi.org/10.31876/rcs.v27i2.35904

Rojas, R. (2008). Guía para realizar investigaciones sociales. Plaza y Valdés.

Shanin, A., Pourhamidi, M., Antony, J., (2013). Typology of Kano Models: A Critical Review of Literature and Proposition of a Revised Model. International Journal of Quality & Reliability Management, 30, 341-358. https://doi.org/10.1108/02656711311299863

Sohrabi, C., Alsafi Z, O’Neill N, Khan M, Kerwan A, Al-Jabir A, Iosifidisa C, Aghad R (2020). World Health Organization declares global emergency: A review of the 2019 novel coronavirus (COVID-19), Int. J. Surg., 76, 71-76. https://doi.org/10.1016/j.ijsu.2020.02.034

Torres, E. S., Leyva, H. N., García, A. T. R., González, F. J. S. & García, G. H. (2020). Equipo de protección personal y COVID-19. Cirujano General, 42(2), 116-123.

Vera, D., Trujillo R. & Chambo, Y. (2020). Diseño y fabricación de caretas faciales ergonómica para el uso del personal médico asistencial de primera línea de atención para cuatro instituciones hospitalarias del departamento del huila ante la emergencia COVID-19.

Wolniak, R (2018). The use of QFD method advantages and limitation. Production engineering archives, 18, 14-17. https://doi.org/10.30657/pea.2018.18.02

World Health Organization- WHO (2020). Transmission of SARSCoV-2: implications for infection prevention precautions Scientific Brief 9 July 2020. COVID-19: Infection prevention and control / WASH. https://www.who.int/publications/i/item/modes-of-transmission-of-viruscausing-covid-19-implications-for-ipc-precaution-recommendations

World Health Organization- WHO (2020b). Rational use of personal protective equipment (PPE) for coronavirus disease (COVID-19): Interim guidance, 19 March 2020 WHO/2019-nCoV/IPC PPE_use/2020.2. World Health Organization. Geneve, Switzerland.

Xie, M., Tan, K., & Goh, T. (2003). Advanced QFD applications. Milwaukee: ASQ Quality Press. https://doi.org/10.1108/13552510410526901.

Zhou, W. (2020). The Coronavirus Prevention Handbook. Skyhorse Publishing.