Economía circular en residuos de aparatos eléctricos y electrónicos
Abstract
Actualmente el uso de recursos naturales, el desafío de leyes y sostenibilidad ambiental, así como la gestión de residuos, recibe una atención considerable. La investigación plantea como objetivo analizar la economía circular como una estrategia en el manejo de residuos de aparatos eléctricos y electrónicos, a través de un estudio descriptivo, no experimental, considerando las computadoras portátiles desechadas en una universidad. El estudio se llevó a cabo en dos etapas: La primera, una propuesta de producto remanufacturado donde se examinó la potencialidad de las partes de computadoras portátiles para ser recicladas en base a 110 equipos reciclados; la segunda, una estrategia de negocio basada en la economía circular, con la finalidad de identificar la percepción de la oferta de computadoras remanufacturadas, para ello se diseñó una herramienta validada por expertos, la cual fue aplicada a 367 estudiantes universitarios. Como resultado, se determinó la relación entre el nivel socioeconómico y la aceptación de computadores personales remanufacturados, encontrándose correlaciones significativas. Se concluye, que la economía circular estudiada es una alternativa adecuada de gestión de desechos de partes de computadoras, además se observó una percepción positiva a este tipo de productos de acuerdo a las necesidades de computo de los usuarios.
Downloads
References
Andersen, M. S. (2007). An introductory note on the environmental economics of the circular economy. Sustainability Science, 2(1), 133-140. doi: 10.1007/s11625-006-0013-6
André, H., Ljunggren, M., y Nordelöf, A. (2019). Resource and environmental impacts of using second-hand laptop computers: A case study of commercial reuse. Waste Management, 88, 268-279. doi: 10.1016/j.wasman.2019.03.050
Ashby, M. F. (2016). Materials and sustainable development. Oxford: Butterworth-Heinemann. doi: 10.1016/C2014-0-01670-X
Balde, C. P., Forti, V., Gray, V., Kuehr, R., y Stegmann, P. (2017). The Global e-waste Monitor 2017: Quantities, flows and resources. Bonn: United Nations University and International Telecommunication Union. Recuperado de http://collections.unu.edu/view/UNU:6341
Bocken, N. M. P., Bakker, C., y Pauw, I. D. (2016). Product design and business model strategies for a circular economy. Journal of Industrial Production Engineering, 33(5), 308-320. Doi: 10.1080/21681015.2016.1172124
Cao, J., Chen, Y., Shi, B., Lu, B., Zhang, X., Ye, X., … Zhou, G. (2016). WEEE recycling in Zhejiang Province, China: Generation, treatment, and public awareness. Journal of Cleaner Production, 127, 311-324. doi: 10.1016/j.jclepro.2016.03.147
Clarke, C., Williams, I. D., y Turner, D. A. (2019). Evaluating the carbon footprint of WEEE management in the UK. Resources, Conservation and Recycling, 141, 465-473. doi: 10.1016/j.resconrec.2018.10.003
Coughlan, D., Fitzpatrick, C., y McMahon, M. (2018). Repurposing end of life notebook computers from consumer WEEE as thin client computers – A hybrid end of life strategy for the circular economy in electronics. Journal of Cleaner Production, 192, 809-820. doi: 10.1016/j.jclepro.2018.05.029
Diaz, P. G. (2019). Relación costo-beneficio de sistemas de gestión ambiental en empresas manufactureras venezolanas. Revista de Ciencias Sociales, 25(1), 143-155. doi: 10.31876/rcs.v25i1.27306
Duchin, F. (1992). Industrial input-output analysis: Implications for industrial ecology. Proceedings of the National Academy of Sciences, 89(3), 851-855. doi: 10.1073/pnas.89.3.851
Esenduran, G., Kemahlıoğlu-Ziya, E., y Swaminathan, J. M. (2017). Impact of take-back regulation on the remanufacturing industry. Production and Operations Management, 26(5), 924-944. doi: 10.1111/poms.12673
Gardetti, M. A. (2019). Introduction and the concept of circular economy. In S. S. Muthu (Ed.), Circular economy in textiles and apparel (pp. 1-11). United State: Woodhead Publishing.
Geissdoerfer, M., Savaget, P., Bocken, N. M. P., y Hultink, E. J. (2017). The circular economy – A new sustainability paradigm? Journal of Cleaner Production, 143(1), 757-768. doi: 10.1016/j.jclepro.2016.12.048
Hauschild, M. Z., Rosenbaum, R. K., y Olsen, S. I. (2018). About this book. In M. Z. Hauschild, R. K. Rosenbaum, y S. I. Olsen (Eds.), Life cycle assessment: Theory and practice (pp. 3-8). France: Springer International Publishing. doi: 10.1007/978-3-319-56475-3_1
Hernández, R., Fernández, C., y Baptista, P. (2014). Metodología de la investigación. México, D.F.: McGraw-Hill /Interamericana Editores, S.A. de C.V.
Karvonen, I., Jansson, K., Tonteri, H., Vatanen, S., y Uoti, M. (2015). Enhancing remanufacturing – studying networks and sustainability to support finnish industry. Journal of Remanufacturing, 5(5), 1-16. doi: 10.1186/s13243-015-0015-6
Kasulaitis, B. V., Babbitt, C. W., Kahhat, R., Williams, E., y Ryen, E. G. (2015). Evolving materials, attributes, and functionality in consumer electronics: Case study of laptop computers. Resources, Conservation and Recycling, 100, 1-10. doi: 10.1016/j.resconrec.2015.03.014
Kirchherr, J., Reike, D., y Hekkert, M. (2017). Conceptualizing the circular economy: An analysis of 114 definitions. Resources, Conservation and Recycling, 127, 221-232. doi: 10.1016/j.resconrec.2017.09.005
Korhonen, J., Honkasalo, A., y Seppälä, J. (2018). Circular economy: The concept and its limitations. Ecological Economics, 143, 37-46. doi: 10.1016/j.ecolecon.2017.06.041
Kumar, S., y Rawat, S. (2018). Future e-waste: Standardisation for reliable assessment. Government Information Quarterly, 35(4, Supplement), S33-S42. doi: 10.1016/j.giq.2015.11.006
Kuzmina, K., Prendeville, S., Walker, D., y Charnley, F. (2019). Future scenarios for fast-moving consumer goods in a circular economy. Futures, 107, 74-88. doi: 10.1016/j.futures.2018.12.001
Manhart, A., Blepp, M., Fischer, C., Graulich, K. Prakash, S., Priess, R.,…Tür, M. (2016). Resource Efficiency in the ICT Sector. Germany: Oeko-Institut e.V. Recuperado de https://www.oeko.de/fileadmin/oekodoc/Resource_Efficiency_ICT_LV.pdf
Messmann, L., Helbig, C., Thorenz, A., y Tuma, A. (2019). Economic and environmental benefits of recovery networks for WEEE in Europe. Journal of Cleaner Production, 222, 655-668. doi: 10.1016/j.jclepro.2019.02.244
Millar, N., McLaughlin, E., y Börger, T. (2019). The circular economy: Swings and roundabouts? Ecological Economics, 158, 11-19. doi: 10.1016/j.ecolecon.2018.12.012
Ministerio del Ambiente del Perú (2017). Ministerio del Ambiente promueve gestión adecuada de aparatos eléctricos y electrónicos. Recuperado de http://www.minam.gob.pe/notas-de-prensa/ministerio-del-ambiente-promueve-gestion-adecuada-de-aparatos-electricos-y-electronicos/
Mugge, R., Jockin, B., y Bocken, N. (2017). How to sell refurbished smartphones? An investigation of different customer groups and appropriate incentives. Journal of Cleaner Production, 147, 284-296. doi: 10.1016/j.jclepro.2017.01.111
Nußholz, J. L. K. (2017). Circular business models: Defining a concept and framing an emerging research field. Sustainability, 9(10), 1810. doi: 10.3390/su9101810
Ormazabal, M., Prieto-Sandoval, V., Puga-Leal, R., y Jaca, C. (2018). Circular economy in spanish SMEs: Challenges and opportunities. Journal of Cleaner Production, 185, 157-167. doi: 10.1016/j.jclepro.2018.03.031
Parajuly, K., y Wenzel, H. (2017). Potential for circular economy in household WEEE management. Journal of Cleaner Production, 151, 272-285. doi: 10.1016/j.jclepro.2017.03.045
Robinson, B. H. (2009). E-waste: An assessment of global production and environmental impacts. Science of The Total Environment, 408(2), 183-191. doi: 10.1016/j.scitotenv.2009.09.044
Sauerwein, M., Balkenende, R., Doubrovski, Z., y Bakker, C. (2019). Exploring the potential of additive manufacturing for product design in a circular economy. Journal of Cleaner Production, 226, 1138-1149. doi: 10.1016/j.jclepro.2019.04.108
Schroeder, P., Anggraeni, K., y Weber, U. (2019). The relevance of circular economy practices to the sustainable development goals. Journal of Industrial Ecology, 23(1), 77-95. doi: 10.1111/jiec.12732
Simon, B. (2019). What are the most significant aspects of supporting the circular economy in the plastic industry? Resources, Conservation and Recycling, 141, 299-300. doi: 10.1016/j.resconrec.2018.10.044
Subramanian, K., y Yung, W. K. C. (2016). Review of life cycle assessment on consumer electronic products: Developments and the way ahead. Critical Reviews in Environmental Science and Technology, 46(18), 1441-1497. doi: 10.1080/10643389.2016.1245550
Tukker, A. (2015). Product services for a resource-efficient and circular economy – A review. Journal of Cleaner Production, 97, 76-91. doi: 10.1016/j.jclepro.2013.11.049
Van Weelden, E., Mugge, R., y Bakker, C. (2016). Paving the way towards circular consumption: Exploring consumer acceptance of refurbished mobile phones in the dutch market. Journal of Cleaner Production, 113, 743-754. doi: 10.1016/j.jclepro.2015.11.065
Wells, P. E., y Seitz, M. A. (2006). Challenging the implementation of corporate sustainability: The case of automotive engine remanufacturing. Business Process Management Journal, 12(6), 822-836. doi: 10.1108/14637150610710954
Xue, B., Chen, X., Geng, Y., Guo, X., Lu, C., Zhang, Z., y Lu, C. (2010). Survey of officials’ awareness on circular economy development in China: Based on municipal and county level. Resources, Conservation and Recycling, 54(12), 1296-1302. doi: 10.1016/j.resconrec.2010.05.010
Yi, Z. (2018). Chapter two-market research. In Z. Yi (Ed.), Marketing services and resources in information organizations (pp. 19-27). United States: Chandos Publishing. doi: 10.1016/B978-0-08-100798-3.00002-7
Zlamparet, G. I., Ijomah, W., Miao, Y., Awasthi, A. K., Zeng, X., y Li, J. (2017). Remanufacturing strategies: A solution for WEEE problem. Journal of Cleaner Production, 149, 126-136. doi: 10.1016/j.jclepro.2017.02.004
1.jpg)
1.jpg)
